The Benefits of Downloading Rode Wireless Go 2 for Content Creation, Filmmaking and More

Download Rode Wireless Go 2: A Guide for Content Creators

If you are a content creator who needs to record high-quality audio on the go, you might want to check out the Rode Wireless Go 2, a dual channel wireless microphone system that offers unmatched versatility, performance, and convenience. Whether you are filming, vlogging, podcasting, or livestreaming, the Rode Wireless Go 2 can help you capture crystal-clear sound from two sources simultaneously, with minimal setup and hassle.

download rode wireless go 2

Download File: https://byltly.com/2vvg99

In this article, we will show you how to download the Rode Wireless Go 2 software and firmware, how to use it with different devices and applications, and how it compares with other wireless mic systems on the market. By the end of this guide, you will be able to make the most of your Rode Wireless Go 2 and take your audio quality to the next level.

What is Rode Wireless Go 2 and why you need it

The Rode Wireless Go 2 is an ultra-compact and extremely versatile wireless microphone system that consists of a dual channel receiver and two transmitters. It is an upgrade from the original Rode Wireless Go, which was the world's smallest and first truly wireless microphone system.

The Rode Wireless Go 2 has many features and benefits that make it ideal for content creation, filmmaking, on-camera or on-stage presentations, vlogging, YouTubing, livestreaming, and more. Here are some of them:

Rode Wireless Go 2 features and benefits

• Dual channel wireless microphone system: The Rode Wireless Go 2 allows you to record two sound sources simultaneously, such as two speakers, two instruments, or a speaker and an ambient sound. You can choose to record each channel separately or combine them for ultimate flexibility in post-production.

• Series IV 2.4GHz digital transmission: The Rode Wireless Go 2 uses state-of-the-art digital transmission technology with 128-bit encryption, which delivers crystal-clear audio at up to 200m (line of sight) and optimised for extremely stable operation in dense RF environments.

• On-board recording: The Rode Wireless Go 2 has over 40 hours of internal memory on each transmitter, which means you can record audio directly onto the device without needing a camera or a phone. This is a great backup option in case of dropouts or audio issues, or a standalone recorder in a pinch.

• Safety channel: The Rode Wireless Go 2 has a safety channel feature that records a second track at -20dB in case the main track clips or distorts. This way, you can always have a clean audio track to work with in post-production.

• Flexible gain control: The Rode Wireless Go 2 has a three-stage pad that lets you adjust the output level of the receiver to suit your device or application. You can also adjust the input level of the transmitters via the Rode Central app or on the device itself.

• Built-in microphone and external input: The Rode Wireless Go 2 has a high-quality omnidirectional condenser microphone built into each transmitter, which can be clipped onto clothing or mounted on a cold shoe. You can also use the 3.5mm TRS input to connect any external microphone, such as a lavalier, headset, or shotgun mic.

• Rechargeable battery and USB-C connectivity: The Rode Wireless Go 2 has a rechargeable lithium-ion battery that provides up to 7 hours of continuous use on a single charge. You can also power the device via USB-C, which also allows you to connect it to your computer for firmware updates and advanced settings.

• Compact and lightweight design: The Rode Wireless Go 2 is incredibly small and light, weighing only 31g each. It comes with a handy pouch that can fit in your pocket or bag, making it easy to carry around and set up anywhere.

Rode Wireless Go 2 price and availability

The Rode Wireless Go 2 is available now from Rode's official website and authorized dealers worldwide. The retail price is $299 USD, which includes the dual channel receiver, two transmitters, three furry windshields, three USB-C cables, and a pouch. You can also purchase additional accessories, such as lavalier mics, cables, mounts, and cases from Rode's website.

How to download Rode Wireless Go 2 software and firmware

To get the most out of your Rode Wireless Go 2, you need to download the Rode Central app, which is the companion software for the device. Rode Central allows you to access advanced features and settings, update your firmware, and export your audio files. Here is how to download and use Rode Central:

How to download rode wireless go 2 software

Download rode wireless go 2 user guide

Rode wireless go 2 firmware update download

Download rode connect for wireless go 2

Rode wireless go 2 app download for android

Rode wireless go 2 app download for ios

Download rode wireless go 2 manual pdf

Rode wireless go 2 driver download for windows

Rode wireless go 2 driver download for mac

Download rode wireless go 2 setup guide

Rode wireless go 2 review and download link

Download rode wireless go 2 accessories list

Rode wireless go 2 vs rode wireless go comparison download

Download rode wireless go 2 tips and tricks

Rode wireless go 2 best settings download

Download rode wireless go 2 warranty information

Rode wireless go 2 troubleshooting guide download

Download rode wireless go 2 tutorial video

Rode wireless go 2 podcasting software download

Download rode wireless go 2 livestreaming software

Rode wireless go 2 dual channel microphone system download

Download rode wireless go 2 specifications sheet

Rode wireless go 2 price and availability download

Download rode wireless go 2 unboxing video

Rode wireless go 2 testimonials and feedback download

Download rode wireless go 2 features and benefits

Rode wireless go 2 alternatives and competitors download

Download rode wireless go 2 case study and success story

Rode wireless go 2 affiliate program and commission download

Download rode wireless go 2 discount code and coupon

Rode wireless go 2 free trial and demo download

Download rode wireless go 2 FAQ and support page

Rode wireless go 2 product launch and announcement download

Download rode wireless go 2 giveaway and contest details

Rode wireless go 2 blog posts and articles download

Download rode wireless go 2 press release and media kit

Rode wireless go 2 social media posts and hashtags download

Download rode wireless go 2 webinar and online event registration

Rode wireless go 2 customer reviews and ratings download

Download rode wireless go 2 Q&A and interview transcript

Rode wireless go 2 newsletter and email list download

Download rode wireless go 2 infographic and presentation slides

Rode wireless go 2 audio samples and sound quality download

Download rode wireless go 2 e-book and white paper

Rode wireless go 2 compatibility and integration download

Download rode wireless go 2 fun facts and trivia

Rode wireless go 2 history and background download

Download rode wireless go 2 testimonials and feedback

Rode Central: The companion app for Rode Wireless Go 2

Rode Central is a free app that you can download from Rode's website for Windows and Mac computers. It is compatible with the Rode Wireless Go 2, as well as other Rode products, such as the NT-USB Mini, the VideoMic NTG, and the Rodecaster Pro.

To download Rode Central, follow these steps:

• Go to and click on the "Download" button under "Rode Central".

• Select your operating system (Windows or Mac) and click on the "Download" button again.

• Once the download is complete, open the file and follow the instructions to install Rode Central on your computer.

• Launch Rode Central and connect your Rode Wireless Go 2 receiver to your computer via USB-C cable. Make sure your transmitters are also turned on and paired with the receiver.

• You should see your Rode Wireless Go 2 appear on the Rode Central dashboard. You can now access its features and settings.

How to update your Rode Wireless Go 2 firmware with Rode Central

One of the benefits of using Rode Central is that you can easily update your Rode Wireless Go 2 firmware whenever there is a new version available. Firmware updates can improve the performance and functionality of your device, as well as fix any bugs or issues.

To update your Rode Wireless Go 2 firmware with Rode Central, follow these steps:

• Make sure your Rode Wireless Go 2 receiver and transmitters are connected to your computer via USB-C cable and turned on.

• Launch Rode Central and click on the "Update" button under your Rode Wireless Go 2. If there is no update available, you will see a "Up to date" message instead.

• Follow the instructions on the screen to complete the firmware update process. Do not disconnect or turn off your device during this process.

• Once the update is complete, you will see a "Update successful" message. You can now disconnect your device and enjoy the new features and improvements.

How to use Rode Wireless Go 2 with different devices and applications

The Rode Wireless Go 2 is designed to work with a wide range of devices and applications, such as cameras, phones, tablets, computers, and audio recorders. You can use it for various purposes, such as filmmaking, vlogging, podcasting, livestreaming, and more. Here is how to use the Rode Wireless Go 2 with different devices and applications:

How to connect Rode Wireless Go 2 to cameras, phones, and tablets

The Rode Wireless Go 2 comes with a 3.5mm TRS cable that you can use to connect the receiver to any device that has a 3.5mm microphone input, such as DSLR cameras, camcorders, action cameras, audio recorders, and more. Simply plug the cable into the output jack of the receiver and the input jack of your device, and you are ready to go.

If you want to use the Rode Wireless Go 2 with your phone or tablet, you will need a different cable depending on the type of device you have. For iOS devices, you will need a 3.5mm TRS to Lightning cable, such as the Rode SC15. For Android devices, you will need a 3.5mm TRS to USB-C cable, such as the Rode SC16. You can also use a 3.5mm TRRS cable, such as the Rode SC7, but you will need to enable the "Use TRRS" option in the Rode Central app.

Once you have the right cable for your device, simply plug it into the output jack of the receiver and the input jack of your device, and you are ready to go. You can use any app that supports external microphones, such as the native camera app, Rode Reporter, Filmic Pro, GarageBand, and more.

How to access advanced features and settings with Rode Central

As mentioned earlier, Rode Central is the companion app for the Rode Wireless Go 2 that allows you to access advanced features and settings that are not available on the device itself. Some of these features and settings are:

• Mute lock: This feature prevents accidental muting or unmuting of the transmitters by locking the mute button.

• Fine gain control: This feature allows you to adjust the input level of the transmitters in 1dB increments from -30dB to +20dB.

• Compressor/limiter: This feature allows you to apply a compressor or a limiter to your audio signal to reduce dynamic range and prevent clipping or distortion.

• Low cut filter: This feature allows you to apply a low cut filter to your audio signal to reduce low frequency noise and rumble.

• Polarity inversion: This feature allows you to invert the polarity of your audio signal to correct phase issues or improve compatibility with other devices.

• Stitch mode: This feature allows you to combine the two channels of audio into one mono track for easier editing and sharing.

• Use TRRS: This feature allows you to use a 3.5mm TRRS cable to connect your receiver to your phone or tablet.

• LED brightness: This feature allows you to adjust the brightness of the LED indicators on your receiver and transmitters.

• Device name: This feature allows you to rename your receiver and transmitters for easier identification.

• Factory reset: This feature allows you to reset your receiver and transmitters to their default settings.

To access these features and settings with Rode Central, follow these steps:

• Make sure your Rode Wireless Go 2 receiver and transmitters are connected to your computer via USB-C cable and turned on.

• Launch Rode Central and click on your Rode Wireless Go 2 on the dashboard.

• You will see a list of features and settings on the left side of the screen. Click on any of them to access their options and adjust them as you wish.

• You can also click on the "Export" button on the top right corner of the screen to export your audio files from your transmitters' internal memory.

• You can also click on the "Update" button on the top right corner of the screen to check for firmware updates for your device.

How to record and export audio with Rode Wireless Go 2

One of the most amazing features of the Rode Wireless Go 2 is that it can record audio directly onto the transmitters' internal memory, without needing a camera or a phone. This means you can use the Rode Wireless Go 2 as a standalone recorder, or as a backup option in case of dropouts or audio issues.

To record audio with the Rode Wireless Go 2, follow these steps:

• Turn on your receiver and transmitters and make sure they are paired.

• Clip the transmitters onto your sound sources, such as clothing, instruments, or mounts. You can use the built-in microphone or connect an external microphone via the 3.5mm input.

• Press the record button on the receiver to start recording. You will see a red LED indicator on the receiver and transmitters, and a timer on the receiver's screen.

• Press the record button again to stop recording. You will see a green LED indicator on the receiver and transmitters, and a file name on the receiver's screen.

• You can also press the mute button on the transmitters to mute or unmute them during recording. You will see a yellow LED indicator on the muted transmitter, and a mute icon on the receiver's screen.

• You can also press the power button on the receiver to pause or resume recording. You will see a blue LED indicator on the receiver and transmitters, and a pause icon on the receiver's screen.

To export audio from the Rode Wireless Go 2, follow these steps:

• Connect your receiver to your computer via USB-C cable and turn it on.

• Launch Rode Central and click on your Rode Wireless Go 2 on the dashboard.

• Click on the "Export" button on the top right corner of the screen.

• You will see a list of audio files from your transmitters' internal memory. You can select one or more files to export, or select all files by clicking on the checkbox next to "Select All".

• You can also preview, rename, or delete files by clicking on the icons next to each file name.

• Click on the "Export" button again to export your selected files to your computer. You can choose the destination folder and format (WAV or MP3) for your files.

• Once the export is complete, you will see a "Export successful" message. You can now disconnect your device and edit or share your audio files as you wish.

Rode Wireless Go 2 comparison with other wireless mic systems

The Rode Wireless Go 2 is not the only wireless microphone system on the market, but it is certainly one of the best. It offers many advantages over other wireless mic systems in terms of size, weight, performance, features, and price. Here is how it compares with some of its competitors:

Rode Wireless Go 2 vs Rode Wireless Go

The Rode Wireless Go 2 is an upgrade from the original Rode Wireless Go, which was launched in 2019 and became a huge success among content creators. The main differences between them are:

FeatureRode Wireless Go 2Rode Wireless Go

ChannelsDual channel (two transmitters)Single channel (one transmitter)

Transmission rangeUp to 200m (line of sight)Up to 70m (line of sight)

Battery lifeUp to 7 hoursUp to 7 hours

Internal memoryOver 40 hours per transmitterNone

Safety channelYes (-20dB)No

Fine gain controlYes (-30dB to +20dB)No (+0dB or -12dB)

Mute lockYesNo

Polarity inversionYesNo

Stitch modeYesNo

Price$299 USD$199 USD

As you can see, the Rode Wireless Go 2 has many improvements and additions over the Rode Wireless Go, making it a more versatile, reliable, and powerful wireless microphone system. However, the Rode Wireless Go is still a great option for those who only need one channel of audio, or who want to save some money.

Rode Wireless Go 2 vs DJI Mic

The DJI Mic is a wireless microphone system that is designed to work with DJI's Osmo Pocket and Osmo Action cameras. It consists of a receiver that attaches to the camera via a USB-C port, and a transmitter that has a built-in microphone and a 3.5mm input. The main differences between the Rode Wireless Go 2 and the DJI Mic are:

FeatureRode Wireless Go 2DJI Mic

ChannelsDual channel (two transmitters)Single channel (one transmitter)

Transmission rangeUp to 200m (line of sight)Up to 100m (line of sight)

Battery lifeUp to 7 hoursUp to 6 hours

Internal memoryOver 40 hours per transmitterNone

Safety channelYes (-20dB)No

Fine gain controlYes (-30dB to +20dB)No (+0dB or -12dB)

Mute lockYesNo

Polarity inversionYesNo

Stitch modeYesNo

Price$299 USD$109 USD

The Rode Wireless Go 2 has many advantages over the DJI Mic, such as dual channel recording, longer transmission range, internal memory, safety channel, fine gain control, mute lock, polarity inversion, and stitch mode. However, the DJI Mic is much cheaper and more compact, and it works seamlessly with DJI's cameras.

Rode Wireless Go 2 vs VideoMic Me

The VideoMic Me is a directional microphone that plugs directly into the headphone jack of your phone or tablet. It is designed to improve the sound quality of your videos, vlogs, podcasts, and more. The main differences between the Rode Wireless Go 2 and the VideoMic Me are:

FeatureRode Wireless Go 2VideoMic Me

ChannelsDual channel (two transmitters)Single channel (one microphone)

Transmission rangeUp to 200m (line of sight)N/A (wired connection)

Battery lifeUp to 7 hoursN/A (no battery required)

Internal memoryOver 40 hours per transmitterNone

Safety channelYes (-20dB)No

Fine gain controlYes (-30dB to +20dB)No (fixed output level)

Mute lockYesNo

Polarity inversionYesNo

Stitch modeYesNo

Price$299 USD$59 USD

The Rode Wireless Go 2 has many advantages over the VideoMic Me, such as wireless operation, dual channel recording, internal memory, safety channel, fine gain control, mute lock, polarity inversion, and stitch mode. However, the VideoMic Me is much cheaper and simpler to use, and it has a directional pickup pattern that reduces background noise.

Conclusion and FAQs

The Rode Wireless Go 2 is a remarkable wireless microphone system that offers unparalleled versatility, performance, and convenience for content creators. It allows you to record high-quality audio from two sources simultaneously, with minimal setup and hassle. It also has many advanced features and settings that you can access with the Rode Central app, such as on-board recording, safety channel, fine gain control, mute lock, polarity inversion, and stitch mode.

If you are looking for a wireless microphone system that can handle any situation and deliver professional results, the Rode Wireless Go 2 is the one for you. It is available now from Rode's website and authorized dealers worldwide for $299 USD.

To help you get started with your Rode Wireless Go 2, here are some frequently asked questions and answers:

FAQs

• Q: How do I pair the transmitters with the receiver?

A: The transmitters and the receiver are pre-paired out of the box, so you don't need to do anything to pair them. However, if you need to re-pair them for any reason, you can do so by following these steps:

• Turn off all the devices.

• Press and hold the power button on the receiver until the LED flashes blue.

• Press and hold the power button on one of the transmitters until the LED flashes blue.

• The receiver and the transmitter will pair automatically and show a solid blue LED.

• Repeat steps 2-4 for the other transmitter.

• You can now turn on all the devices and use them normally.

• Q: How do I switch between mono and stereo mode?

A: The Rode Wireless Go 2 has two modes: mono and stereo. In mono mode, both channels of audio are mixed into one track. In stereo mode, each channel of audio is recorded separately. You can switch between these modes by following these steps:

• Turn on your receiver and transmitters.

• Press and hold the power button on the receiver for three seconds until the LED flashes green.

• The receiver will switch between mono and stereo mode. You will see a "M" or "S" icon on the receiver's screen to indicate the current mode.

• You can also switch between these modes with the Rode Central app.

• Q: How do I check the battery level of the devices?

A: You can check the battery level of the receiver and the transmitters by looking at the LED indicators on the devices. The LED color indicates the battery level as follows:

• Green: Full battery

• Yellow: Medium battery

• Red: Low battery

• Flashing red: Critical battery

You can also check the battery level of the devices with the Rode Central app, which shows the percentage of the battery remaining.

• Q: How do I charge the devices?

• A: You can charge the receiver and the transmitters by connecting them to a power source via USB-C cable. You can use any USB-C charger, such as a wall adapter, a power bank, or a computer. You can also charge the devices while using them, as long as they are connected to a power source. It takes about two hours to fully charge the devices from empty.

• Q: How do I use the furry windshields?

A: The furry windshields are included with the Rode Wireless Go 2 to reduce wind noise and plosives when using the built-in microphone outdoors. To use them, follow these steps:

• Remove the foam windshield from the transmitter by gently pulling it off.

• Slide the furry windshield over the transmitter until it covers the microphone hole.

• Make sure the furry windshield is securely attached and does not cover the LED indicator or the mute button.

• You can now use the transmitter with the furry windshield outdoors.

44f88ac181